Up to 15 to 20 million bicycle units are sold annually in the United States. If you own a bike you need to understand common bicycle repairs for brakes. Learn bike repair solutions and use a local bike repair shop too.
Are the Brakes Engaging?
When your brakes aren’t engaging there could be extra slack in the cable. This is an easy fix you can handle. If that doesn’t work, have your bike inspected by a local bike repair shop.
Address Brake Rub
Brake rub is when brake pads touch rims when they shouldn’t. It causes premature wear and damages rims. A common fix is aligning a misaligned wheel. A local bike repair shop can check your brakes and offer the bicycle repair you need.
Bike Repair Shops Halt Brake Squeals
When you hear an ear-piercing squeal, check your brake pads and rims for debris or excessive chain lube build-up. It’s as easy as using a degreaser to clean them. Contact bike repair shop San Diego CA residents trust to ensure your bicycle brakes are working properly.
Biking is a popular mode of transportation and recreation in the United States and between 15 to 20 million bicycles are sold yearly. However, sometimes bikes can run into problems, particularly with their brakes. Thankfully, there are some easy ways to rectify these issues.
1. Sticking Brakes
If you brake and nothing happens or the brake gets stuck on the rim, you’ll need to figure out what is causing the brakes to stick. Check the brake cable housing first to see if it is rusty or split. If it is, you may need the housing replaced at a local bike repair shop. Additionally, because the cables themselves are not galvanized, you may want to consider replacing them as well. However, if you need to use the old ones, make sure you lube them well before using them.
2. Slack Brakes
If your brakes feel slack when you apply pressure and little happens, it’s likely that the cable isn’t tensioned properly. However, this could also mean that the cable is slipping through the bolts and the bolts need tightening to prevent this from happening. Your local bike repair shop will be able to identify the cause of this problem quickly and fix the issue so that you can get back to riding.
3. Brakes that Squeal
If your brakes are making a squealing sound when you engage them, it’s usually an issue with the braking surface. Clean the rim and pads with a mild degrease, to help remove any build-up that could be causing the issue. If this isn’t working sufficiently, you should consider speaking to someone at your local bike repair shop to learn more about what could be causing this issue.
4. Inconsistant Pressure
If one brake caliper is working more than the other, you could experience a bit of sponginess, and it seems like the brakes aren’t applying consistent pressure. This can be caused by a variety of things, most commonly a buckling of the wheel. However, it could also be due to brake pads that aren’t correctly aligned, making the pressure vary between them. If you’re unsure about the alignment of your brakes or if you’re concerned that your wheel may be buckling, a technician at your local bike repair shop will be able to help you identify and fix the exact problem.
Although cycling is a popular sport and mode of transport, just like cars, they do need some attention from time to time. If you are experiencing any of these issues with your bike brakes and haven’t been able to fix them on your own, speak to someone at your local bike shop so that you can get back to riding as soon as possible.